65-inch TV dimensions and stand width by model
A nominal 65-inch 16:9 picture measures 143.9 × 80.9 cm (56.7 × 31.9 inches), or about 1,805 square inches. The case and stand dimensions depend on the model.
How will it fit in the room?


- TV with standard stand
- 145.2 × 90.9 × 33.4 cm
- Width × height × depth. Stand adds 7.3 cm to the height.
- Tabletop footprint
- 3,924.5 cm²
- 117.5 × 33.4 cm · support span × installed depth. This rectangle includes open space between the supports.
- Estimated bezel and front surround
- 669.9 cm² (5.5% of front)
- Body face minus the estimated 64.5″ picture (11,468.8 cm²). Includes the frame, lower trim and any front-facing grille.
How much of the stand touches the tabletop?
Measure the flat underside of one rectangular pad. For identical pads, multiply its width and depth by the number touching the surface.
Enter positive measurements and a whole number of pads.
Check this stand on my consoleSpecifications for Sony K-65S30
Outside dimensions by model
US specifications, in width × height × depth order. Stand width measures the support across the tabletop. The complete TV depth with stand gives the front-to-back space to check.
Sony K-65S30
- Body without stand
- 145.2 × 83.6 × 7.2 cm57.2 × 32.9 × 2.8 in
- TV with standard stand
- 145.2 × 90.9 × 33.4 cm57.2 × 35.8 × 13.1 in
- Standard stand width
- 117.5 cm46.3 in
- Factory carton
- 158.8 × 96.5 × 18.4 cm62.5 × 38.0 × 7.2 in
Sony XR-65X90L
- Body without stand
- 144.5 × 83.1 × 5.7 cm56.9 × 32.7 × 2.2 in
- TV with standard stand
- 144.5 × 86.1 × 34.5 cm56.9 × 33.9 × 13.6 in
- Standard stand width
- 120.9 cm47.6 in
- Factory carton
- 158.8 × 101.1 × 16.7 cm62.5 × 39.8 × 6.6 in
Will the feet sit on a 120 cm wide console?
The K-65S30 has a 117.5 cm standard stand, leaving 2.5 cm across the entire 120 cm top. The XR-65X90L stand measures 120.9 cm and exceeds the same top by 0.9 cm. Both TV bodies are wider than the console.
Measure the flat, usable part of the top, excluding rounded ends. Then check the front-to-back depth, load rating and the model’s installation instructions. A positive width margin alone does not establish a suitable support.
Where will the picture sit?
At 6.5 feet the picture fills 40° of horizontal view. At 8.8 feet it fills 30°. Measure from your seated eye position to the front of the screen. For wall height, use your eye height and the height of the picture.