50-inch TV dimensions for a cabinet opening

A nominal 50-inch 16:9 picture measures 110.7 × 62.3 cm (43.6 × 24.5 inches), or about 1,068 square inches. The case and stand dimensions depend on the model.

How will it fit in the room?

Front view with a 200 cm console for scale. The supplied stand rests on the tabletop.
TV with standard stand
111.9 × 71.5 × 28.6 cm
Width × height × depth. Stand adds 6.6 cm to the height.
Tabletop footprint
1,901.9 cm²
66.5 × 28.6 cm · support span × installed depth. This rectangle includes open space between the supports.
Estimated bezel and front surround
507.5 cm² (7% of front)
Body face minus the estimated 49.5″ picture (6,754.8 cm²). Includes the frame, lower trim and any front-facing grille.
How much of the stand touches the tabletop?

Measure the flat underside of one rectangular pad. For identical pads, multiply its width and depth by the number touching the surface.

Enter positive measurements and a whole number of pads.

Check this stand on my consoleSpecifications for Sony KD-50X85K

Outside dimensions by model

US specifications, in width × height × depth order. Stand width measures the support across the tabletop. The complete TV depth with stand gives the front-to-back space to check.

Sony KD-50X85K

Body without stand
111.9 × 64.9 × 7.0 cm44.1 × 25.6 × 2.8 in
TV with standard stand
111.9 × 71.5 × 28.6 cm44.1 × 28.1 × 11.3 in
Standard stand width
66.5 cm26.2 in
Factory carton
122.5 × 78.2 × 14.1 cm48.2 × 30.8 × 5.6 in

Sony K-50S30

Body without stand
111.9 × 64.9 × 7.0 cm44.1 × 25.6 × 2.8 in
TV with standard stand
111.9 × 71.4 × 26.7 cm44.1 × 28.1 × 10.5 in
Standard stand width
71.5 cm28.1 in
Factory carton
122.5 × 78.2 × 14.1 cm48.2 × 30.8 × 5.6 in

Is a 112 cm cabinet opening wide enough?

Both Sony bodies shown here measure 111.9 cm across. A 112 cm opening leaves just 1 mm of total lateral space before installation clearances. Their standard feet differ in width by 5 cm, so the same screen size can call for a different shelf.

Measure between the closest hinges or trim pieces with the doors open. Use the smallest reading and check the manufacturer’s ventilation allowance. For a narrow installation, the hinge clearance can matter more than the screen calculation.

Where will the picture sit?

At 5.0 feet the picture fills 40° of horizontal view. At 6.8 feet it fills 30°. Measure from your seated eye position to the front of the screen. For wall height, use your eye height and the height of the picture.